關于VMware12 下安裝與配置CentOS 6.5 64位 的方法圖文教程

來源:本網整理

二、基本步驟1.虛擬機的安裝下載Vmare Workstation,以管理員身份運行,安裝,一直下一步即可。VM安裝好后,注冊碼百度一大堆。2.插件安裝步驟一完成后,打開任務管理器,找到服務項,選擇按名稱排序,將框中四項全部停止運行。然后打開下載的插件,解壓unlocker206.zip文件,找到 unlocker206\\win-install.cmd,右鍵以管理員身份運行,等待運行完即可。(完成這一步vmware才能識別OS X,路徑不要有中文!3.Mac OS X 10.10的載入相信你以上步驟已做好了,開啟下面旅程吧。基本都是圖片,所以很容易,just follow。4.開啟安裝我遇到了如下問題,百度后知道 出現這種情況,只要找到并打開安裝目錄下的 XXXX.vmx 文件,使用記事本打開后,在 smc.present="TRUE"后添加“smc.version=0”(建議您復制,不包括引號)后保存,問題即可解決。重新啟動www.13333515.buzz防采集請勿采集本網。

s">

關于VMware12 下安裝與配置CentOS 6.5 64位 的方法圖文教程

作者:佚名 字體:[增加 減小] 來源:互聯網 時間:09-05 15:41:52 我要評論 本文給大家介紹關于VMware12 下安裝與配置CentOS 6.5 64位的方法圖文教程,非常不錯,具有參考借鑒價值,感興趣的朋友一起看看吧 ">

前言:本人在配置Hadoop的過程中,需要搭建Cent OS 64 環境,借此,順便將Cent OS 64 的安裝在此記錄,方便自己,也方便大家學習。本次是在VM12虛擬機中實現Cent OS 64 的安裝以及配置,后續還會有Hadoop的安裝配置教程,我們先來進行第一步。

after kernel 4.4(VMWare Workstation 12)need some changes in c code: usr/lib/vmware/modules/source 1)vmmon.tar untar change./vmmon-only/linux/hostif.c replace all: “get_user_pages”

一、VMware 12 Install CentOS 64(Linux)OS

在vmware中使用kail linux關鍵點兩步。1、安裝vmware后,需要自己手動建立虛擬機,完成虛擬機后,需要設置CD-ROM為kail linux的ISO鏡像文件。2、啟動新建的虛擬機,然后根據提示安裝ubuntu系統

create a new vm->there I screenshot my settings in the next steps->

(完成這一步vmware才能識別OS X,路徑不要有中文!3.Mac OS X 10.10的載入 相信你以上步驟已做好了,開啟下面旅程吧。基本都是圖片,所以很容易,just follow。4.開啟安裝 我遇到了如下問題,百度后知道

keep next step->

下載VMware Workstation 11或其他版本。安裝完成,進入下一步,進行安裝VMware Mac OS補丁,使VMware虛擬機中可以出現Apple OS的選項。注:如果不進行此項,將無法安裝Mac虛擬機。

the os name at will,if you understand it->the position choose a folder that you like->next->

12、這里建議選擇單獨磁盤,而磁盤大小使用默認即可,也可以自己設置,我設置了10G 13、設置一個虛擬機文件的存放目錄 14、點擊完成 15、點擊編輯,優化一下虛擬機設置 16、有很多組建用不到,可以選中

next as deault,my computer`s RAM is 8G so i choose 1G that default>next

the net mode choose NAT,then we set IP address to connect the internet->

steps the default->

there I remove the audio card and the printer that impossible use them->accomplish!

the the vm will apper in the left list->

click the centOS 64 hadoop-master,we set the os install cd/DVD Path->

in the position we set the install cd/DVD ,choose the install source that we have upload CentOS64(CentOS6.5)

you can get the centos in the internet->

then we power start the vm cent os 64->

choose the first option install or upgrade an existing system->

OK

default ok that can show the step of check disks->

if check complete choose OK->

OK->Continue

if have a problem below we can learn from internet that we should reboot the vm , then choose skip->

next we reboot the system->

wait a minute show a confirm we choose skip;then it`s can found the install resource,auto install !->

into the view settings->

Choose language, there we choose English(English)->next

choose much next step we get there->

we choose Yes,discard any data->next->

input HostName,i set the master as HostName->next->

next->

The position we choose ShangHai->next

there we must confirm the window that tell us input the password and confirm(Don`t forget that pwd)->next->

there we choose Replace Existing Linux System->next

then choose Write Changes to disk->

next->

The System will progress the install progress->

OK->we Reboot the system

oh welcom view->forward

Yes,I agree to the license Agreement(you known)->

then input your Username and password as will you like and dont`t forget them->

forward

if you get error in the Kdump step neglect it and click finish->

Then Reboot -> wait a minute we can input the password into the system CentOS->

OK The CentOS64`s Install is complete ! Congratulation To you !

Then we set the net to the VM ->

choose the vpn connections -> Configure VPN->

Add->

Create->

RName the connection name we named master ->

let find the settings options there->

Then choose VMnet8->'NAT設置'->

We can get the Net GateWay and NetMask etc...

then we set the net work->

The Address input as will but cant repeat with other !

if we don`t known the DNS servers we input the chorm`s DNS 8.8.8.8;

then we into the vm->set the IPv4 Settings:

Method:Manual(static address);

Address:192.168.239.128;

NetMask:255.255.255.0;

GateWay:192.168.239.2;

DNS server:8.8.8.8

Apply ->

You should start your VMware NAT Service if you want VM to connection the internet via conputer !

Then we find the network ico is have not the error ico ;

We can ping the host 192.168.239.1

you can see it`s successful !

let we test->start the Firfox explorer->input the url www.baidu.com->enter->

That you can see the vm CentOS can surf the internet !

Then let we configurate the Hadoop install and configuration !

以上所述是小編給大家介紹的關于VMware12 下安裝 CentOS 6.5 64位 圖文教程,希望對大家有所幫助,如果大家有任何疑問請給我留言,小編會及時回復大家的。在此也非常感謝大家對突襲網網站的支持!

提示其實很清楚!VMware Authorization Service這個VMware授權驗證服務沒有運行!打開主機控制面板—管理工具—服務,找到VMware Authorization Service服務,設置其啟動類型為自動,并運行這個服務即可!如果根本找不到這個服務,就覆蓋安裝一遍VMware workstation虛擬機軟件!一般亂用所謂的優化啟動項軟件都會導致這個問題!內容來自www.13333515.buzz請勿采集。

免責聲明 - 關于我們 - 聯系我們 - 廣告聯系 - 友情鏈接 - 幫助中心 - 頻道導航
Copyright © 2017 www.13333515.buzz All Rights Reserved
3排列五开奖结果 炒股经历 澳门娱乐场城网址 12107期排列3分析 河南体彩十一选五走势图 贵州十一选五历史开奖结果 湖南动物十分钟开奖结果查询_ 时时彩平台客服端架设 今日股票推荐最新消息 甘肃快三开奖结果形态走势 pc蛋蛋专家预测网 股票配资平台推荐是什么 吉林快三app苹果版下载 云南11选五5一定牛 排列3跨度振幅走势图 股票涨跌即将涨停 上海快3最新开奖爱乐彩